Products
Specification
Model   NS-A102 B-202E B-302E
Capacity VA/W 1000VA/600W 2000VA/1200W 3000VA/1800W
Start capacity 1800W 3600W 5400W
Input Voltage 200/220/230/240VAC 200/220/230/240/380/400/415/440VAC
Voltage Range 166VAC~286VAC 166Vac~286Vac or 300Vac~520Vac
Frequency 50 or 60Hz ±5%
Output Voltage   200/220/230/240VAC 200/220/230/240Vac or 380/400/415/440Vac
Frequency 50Hz or 60Hz±1Hz(Bat mode)
Waveform Simulated sine-wave
Transfer Time Black out bypass to ups for 5 seconds
Battery Battery Voltage 24Vdc 48Vdc
Battery Type High rate 12V/5Ah High rate 12V/5Ah 12V/9AH 12V/7AH
Battery Quantity 2pcs 4pcs 4pcs 8pcs
Back-upTime 3mins/600W 3mins/1200W 3mins/
1800W
6mins/
1800W
Recharge Time 10 hours to 90% after fully discharged
Function LED Display 1 LED: Normal(steady on)
Back up(slow blinking)
Batterylow(fast blinking)
Overload/Short/UPS
Cut-off(LED off)
10LEDs: Normal(Green)
Back up(Green)
AVR on(Orange)
UPS cut-off(Orange)
Over heat(Red)
Battery level(5LEDs)
Alarm Buzzer on for Back-up mode, Battery low Buzzer on for Back-up mode ,Battery low ,
over-heat
DC start(Cold start) Yes
Auto Restart UPS Yes
Overload/Short
Protection
Circuit Breaker(Line mode), Fuse and electronic Circuit(back-up mode)
Lightning/Surge
Protection
350J/10000A
Communication Port Black out→Dry contact
Shutdown→5V~24Vdc
Black out→Dry contact
Shutdown→Dry contact or 5V~24Vdc
Enviroment Operation
Temperature
0℃~40℃
Relative Humidity 0~95% non-condensing
Audible Noise <50dBA(at 1M)
Physical Net weight(kgs) 11.5 20.3 UPS→14
BAT→13.5
UPS→14
BAT→24.5
Dimension(W×D×H) 94×385×170mm 160×410×236mm 160×410×236mm(2sets)