Products
Specification
Model   NS-A601 NS-A102 B-152 B-202 B-302
Capacity VA/W 600VA/360W 1000VA/600W 1500VA/900W 2KVA/1200W 3KVA/1800W
Input Voltage 110/115/120VAC or 220/230/240VAC
Voltage Range 83VAC~143VAC or 166VAC~286VAC
Frequency 47HZ~53HZ or 57HZ~63HZ

Output

Voltage 110/115/120VAC or 220/230/240VAC±10%
Frequency 50HZ or 60HZ±1HZ
Waveform Simulated sine-wave
Transfer Time <4ms
Outlets NEMA5-15R*2pcs or the other type NEMA5-15R*6pcs or the other type
Battery Battery Voltage 12Vdc 24Vdc 48Vdc
Battery Type High Rate 12V/5AH 12V/4AH High Rate 12V/5AH High Rate 12V/9AH
Battery Quantity 1PCS 2PCS 4PCS
Back-up Time
(Load with 1 PC)
15mins 40mins 60mins 90mins 120mins
Recharge Time 8 hours to 90% after fully discharged
Function Line Conditioning
Regulation(AVR)
1 step Boost/1 step Buck
LED Display 1 LED: Normal(steady on)
Back up(slow blinking)
Battery low(fast blinking)
Overload/Short/UPS
Cut-off(LED off)
10LEDs: Normal(Green)
Back up(Green)
AVR on(Orange)
UPS cut-off(Orange)
Over heat(Red)
         Battery level(5LEDs)
Alarm Buzzer on for Back-up mode, Battery low Buzzer on for Back-up mode ,
Battery low , over-heat
Auto Alarm reset No Yes
DC start(Cold start) Yes
Auto Restart UPS Yes
Output Auto Delay No Yes
Overload/Short Protection Circuit Breaker(Line mode), Fuse and electronic Circuit(back-up mode)
Lightning/Surge Protection 350J/10000A
Communication Port(DB9) RUPS-2000 software for windows 95/98/NT/2000/ME/XP/Vista
UPS For Elevator No Yes
Environment Operation Temperature 0℃~40℃
Relative Humidity 0%~95%(non-condensing)
Audible Noise <40dBA(at 1M) <50dBA(at 1M)
Physical Net weight(kgs) 6.5 11.5 17.6 20.3 UPS:14KGS Bat.Bank:14kgs
Dimension:
WxDxH(mm)
94×266×170 94×385×170 160×410×236 160×410×236
(2sets)

 

◢Feature

  Full low frequency working, no interference to your equipment
Free of any high frequency transforming power circuit and won’t cause any high frequency disturbance.

 
  With mute switch
Mute switch for 1.5 KVA and above capacities allowing
switching off warning sound at power off.
  Built-in AVR offering wider applications
Built-in AVR function provides automatic when the mains is too high or too low-extra protection to your equipment.

 
  Lightning surge protecting device
It has surge protection device and can effectively absorb 4500 A (8/20μs) and can effectively reduced the damage of thunder strike.

 
  With battery start function
When external power is off, internal battery can be applied to start machine.

 
  Incorporated with DB9 communication interface
It offers possibility of installing monitoring software to set saving and turning off.

 
  With overload and short circuit protection
It has overload protecting device is capable of cutting off power supply upon overload and short circuit.

 
  With auto-restart function
When UPS off and power is supplied by internal battery, UPS will be off automatically when battery energy is exhausted.  And when mains is resumed, UPS will re-start automatically.

 
  Multiple audio warning functions
At UPS off, battery low, both overload and short circuit protecting device will have different warning sound.

 
  Custom long time discharge model acceptable
If long time discharge needed, we can accept custom order and can also add large current charging board to short battery recharge time.

 
  Containing various LED indicating functions
For unit of 1.5KVA capacity or higher, the unit has LED 5 indicating functions, including normal, battery discharge, AVR actions, turning off, overheating and battery power indication.

 
  With large starting current suitable for elevator of each brand
This series has other elevator specific model with larger starting current and output is available 5 seconds after power off and with dry contact signal of power off and machine turning off.

 

 

◢Application

Personal Computer , IT Equipment , Document Control , Work Station , Audio/Video Room , Sales Management System